Correct Operation Method of Pipe Cutter

A pipe cutter is a tool that can be used to cut pipes of different materials, including plastic pipes such as PPR. Cutting pipes is a simple operation, but it requires the right method of operation. In this article, we will guide you through the proper operation of the pipe cutter, and provide some tips and suggestions to help you better use the pipe cutter.

Step 1: Preparation

Before you start cutting, you need to get your pipe cutter and materials ready. Make sure the pipe cutter is in good condition and the blade is sharp. At the same time, when using, be sure to have enough strength, and must take protective measures before use, such as wearing protective gloves to avoid injury during the cutting process.

Step 2: Marking

Before using the pipe cutter, you need to confirm the length and position of the pipe you want to cut, you can use a pencil or marker to mark the area you want to cut. Remember to measure and mark twice to avoid any cutting errors. Confirm the position of the pipe so that it is not difficult to cut the pipe.

Step 3: Cut

Place the pipe cutter over the marked part of the pipe, making sure the blade is aligned with the marked line. Apply pressure to the handle and rotate the tool around the pipe several times; This should rip the pipe. Do not over-tighten, as this can damage the blades or pipes. Rotate several times until the blade punctures the pipe. After puncturing the pipe, continue to turn the tool several times until the pipe falls off. The result should be a clean, even cut without any cracks or rough edges.

Step 4: Check

Check the cut end of the pipe for defects. Make sure the incision has no jagged edges or cracks; If so, smooth them down with a deburring tool or sandpaper. The smooth cut ensures smooth connection between pipe and fittings.

Step 5: Declutter

After the cutter is used, the pipe needs to be carefully arranged and placed in the appropriate container. Pipes of the same length should be placed together for further processing.

https://www.tools-source.com/pex-pipe-cutter-pvc-cutters-tool.html