Optional Accessories for Linear Actuator

The linear actuator is a kind of electric drive device that converts the rotating motion of the motor into the linear reciprocating motion of the motor. It can be used as an execution machine in a variety of simple or complex process flows to achieve remote control, centralized control or automatic control.This article will introduce several optional accessories for electric actuator.

1, Encoder: accurately feedback the number of motor spindle rotation through the pulse number, so as to accurately calculate the change of the electric push rod stroke, to achieve accurate control.

2, Potentiometer: used to feedback the size of the motor resistance, so as to reflect the stroke position of the push rod, and finally achieve the purpose of controlling the push rod to stop at any position in the middle of the stroke.

3, Hand device: some worm gear structure and gear structure of the push rod can be installed hand out shaft, in the case of power failure, after the hand wrench can be connected to the role of the push rod adjustment position.

4, Hall feedback: the motor shaft is installed on the Hall circuit board, through the Hall principle can accurately feedback the motor rotation number to achieve the purpose of precise control of the push rod.

5, PLC control: can provide PLC access port, to achieve real-time process control.

6, controller: also known as transformer, divided into control of a single, 2, 3 and multiple controllers. The AC220V voltage is changed into DC12/24/36V equal voltage, and 1-n electric push rods are connected with the operator in series.

7. Operator: also known as manual controller, it is divided into single-row, 2-row, 3-row and multi-row operators. Connect to controller supreme.

https://www.tools-source.com/50-1000mm-stroke-mini-linear-actuator-1500n-max-lift.html